Wooden storage simplified – FineWoodworking


Wooden offcuts–we love them, we hate them. They take up room, however we “may” want them sometime. They’re too helpful to burn, but it’s troublesome to maintain them in a helpful method. Any answer must be flash-fast, each for storing and for locating the smallest offcut that can serve your present want. In addition to that, it must be versatile sufficient to permit for the always altering provide of assorted lengths and sizes of offcuts and for brand new wooden coming in. My method is easy, near-instant, and versatile, and permits me to maintain and manage all my offcuts and normal lumber in a method that has saved me time and cash.

After I started my furnishings making profession, I constructed shoji (Japanese wooden and paper doorways) and related fitments, on my condominium’s tiny fireplace escape in Somerville, Mass. I had no room for preserving spare lumber, a lot much less cutoffs, in my one-room condominium. But, there I started my lengthy trek to effectively preserving and storing cutoffs from varied woods, sizes, and thicknesses.

At present, after 30 years as first an expert, and now beginner, woodworker, I not often have to throw helpful wooden on the fireplace. As an alternative I fairly often discover precisely what I want on my cabinets and storage stacks shortly.

Rules that simplify

I started by attempting to retailer wooden by species, however shortly realized that will require extra space and group than I had obtainable. As an alternative, I manage as follows:

  • On the highest stage, I separate strong inventory from plywood. Even this rule isn’t absolute, however practically so. Strong inventory is available in an infinite number of kinds and sizes and thicknesses, however plywood is extra constrained in its doubtless sizes. This technique I apply to plywood, however it’s easier, so right here I deal with only solid-wooden storage.
  •  The strong inventory I manage first by size, into a number of groupings:
    • As much as 30cm, or about 12 in.
    • As much as 75cm, or about 30 in.
    • As much as 120cm, or 44 in.
    • As much as 160cm, or about 5-ft, 4 in.
    • As much as 8 ft. (since numerous issues begin out this measurement)
    • As much as 16 ft. for something over 8 ft.
    • Anything longer must be a specialty, saved elsethe place

Having separated by size, every size class is saved on a set of cabinets, one above the opposite. For the reason that cabinets in every class are all about the identical size, this technique maximizes using wall house, for the reason that cabinets holding different sizes will be hung proper up towards this set.

As a result of I’ve a sequence of cabinets, often 3, 4 or 5, one above the opposite, only for one size, I retailer one thickness on every shelf throughout the size class. For 3 cabinets these often these find yourself being beneath ¾ in.; as much as 1½ in.; and thicker. With size and thickness outlined inside one shelf, I can stack all my lumber of that size and thickness by width, organized a bit by species the place it is sensible.

Using an old bookshelf for wood storage

Right here, my next-to-smallest items are stacked on an previous bookshelf. They run ~1-2 toes in size. The highest shelf is all beneath ¾ in., and lined up by width. Simple to seek out one thing that can yield a 1/2-in.-thick piece 10 in. lengthy and a pair of in. large.

wood storage

Listed below are the following measurement up–these run roughly 2 ft. to three ft. (though I work principally in metric, I’ve to know the English system for purchases, and so on.). By the precept, all of the wooden I personal that’s of that particular LENGTH is right here–it’s not and can’t be anyplace else within the store. After I need this size or much less for a mission or jig, and so on. I am going right here and shortly discover what I want with minimal waste. Every shelf has a slender vary of thicknesses, so I can slender any search quickly to a single shelf, at the very least to begin.On the left aspect of the picture above, you see the tip of the cabinets of the following measurement up. Beneath, the storage bins for the cutoffs which might be too quick or oddly formed to be on a shelf are additionally sorted by thickness.

In use

What occurs after I want a bit of wooden? I do know immediately the place to look, and which comparatively small pile to dig by. It takes nearly no time to discern if I’ve what I want, or should go “one measurement up” to chop down some bigger piece into the wanted bit.

For instance, I used to be simply constructing a espresso desk, and wanted finish caps for the highest. The size was 22 in. and the width was 1½ in. for every of the 2 items. I walked to the “as much as 30 in.” shelf, and shortly noticed that I had a bit of cherry from which I might lower each finish caps. Had that not been the case, I’d have gone to the “as much as 44 in.” shelf, and sought an answer there.

Had THAT not labored, I’d have escalated to the longer choices, till I discovered what I wanted. This minimizes waste, permits most use of offcuts, and ensures that if I don’t discover the fabric I want, then it’s not in my store. I gained’t discover the wooden every week later beneath a pile of butternut within the nook, having bought 5 board toes to supply the small piece I wanted for this tabletop.

And the system is versatile. If I’ve extra items of 1 measurement than I’ve room for, I add the shortest ones to the scale shorter, or the longest ones to the following measurement up shelf, and alter my psychological map of the shelf order accordingly. Ease of use, flexibility beneath altering wants, and near-instant discovering of what’s obtainable are the targets, and this technique accomplishes that.

Join eletters at the moment and get the newest methods and how-to from High-quality Woodworking, plus particular provides.

Get woodworking suggestions, skilled recommendation and particular provides in your inbox