EasyTravel

Taking pictures macro with a $20 microscope lens and a DIY 3D printed adapter


Taking pictures macro is among the most fascinating images matters one can try. Other than seeing an entire new tiny perspective on the world, there are such a lot of other ways you are able to do it. You should buy an precise macro lens, or you should utilize an everyday lens with extension tubes or reversing rings. You’ll be able to even mount two lenses again to again. Or, you are able to do what Micael Widell did and use a 3D printed adapter with a microscope goal.

The adapter comes courtesy of macro photographer and 3D printing fanatic Nicholas Sherlock, who has posted the file to Thingiverse. The adapter is accessible in full-frame and APS-C variations for Nikon, Canon, Sony and even M42 (which may be tailored to just about all the things). And the microscope lens used is a low cost 4x achromatic goal for simply $19.99. We’ve truly featured it right here on DIYP earlier than.

Micael’s video, although, takes a deep dive into learn how to use it, together with a few of the caveats of taking pictures with such excessive magnification. With a 4x microscope goal, meaning an especially shallow depth of area, which Micael describes as “a enjoyable problem” when out and about taking pictures handheld. Sometimes with a depth of area this shallow, you’d need to rack focus and stack photos in submit to attempt to get a larger depth of area.

The elements for each the full-frame and APS-C adapters may be printed on nearly any printer. They don’t require a big construct quantity in any respect, though the orientation is sort of vital in an effort to get the most effective outcomes – particularly for printing the screw threads on the modular APS-C items in addition to the mount on each to attach it to your digital camera. You’ll need to print it with PETG or ABS, too, for greatest outcomes. PLA ought to work for a short time, nevertheless it’s not going to be very sturdy.

Seeing the outcomes Micael managed to provide with this setup in his video, I’m actually tempted to go and order one in all these goals now and hearth up the printer. Nicely, I suppose there’s no urgency in firing up the printer if the lens is transport from China, however nonetheless, it’s good to be ready for when these packages finally present up!



Leave a Comment