RED V-RAPTOR Firmware 1.3.4 Launched – Provides ELQ R3D High quality Recording, RED Join and Extra


RED V-RAPTOR Firmware 1.3.4 Released - Adds ELQ R3D Quality Recording, RED Connect and More

New firmware 1.3.4 for RED V-RAPTOR is out and it brings ELQ R3D high quality, RED CONNECT (beta) for full decision reside R3D streaming, AF enhancements, and extra. The firmware may be downloaded totally free on RED’s web site.

It has been roughly over a yr since RED first introduced the white stormtrooper model of the V-RAPTOR cinema digital camera with an 8K 120fps VV sensor and shortly after the black model (manufacturing) fashions went on-line.

A number of days in the past, the US-based firm launched one more firmware replace that brings some new options and irons out some bugs. Let’s take a better look.

RED V-RAPTOR firmware 1.3.4

The brand new V-RAPTOR firmware provides ELQ R3D high quality recording, RED Join (beta) for full decision reside R3D streaming, AF enhancements, assist for numerous new reminiscence playing cards, and extra.

RED V-RAPTOR. Picture supply: RED

The total record of serious adjustments since firmware 1.2.7 contains the next objects:

  • Added ELQ R3D High quality
  • Added RED Join (beta) – Full Decision Dwell R3D Streaming. Please word that this can be a license-enabled characteristic. Calibration should be carried out in Sensor Flip mode. Some units could expertise intermittent connection points over USB-C tethering. A warning message will happen with unapproved Media and Batteries. Extra details about the RED Join may be discovered right here.
  • Added AF Enhancements
  • Added Quiet File Fan Management
  • Added DSMC3 Monitor through-camera firmware replace assist (Requires SmallHD OS5 or later)
  • Added enhanced timecode habits
  • Added Consumer calibration optimization lowering course of from a number of minutes to roughly 30 seconds
  • Added discrete monitor LUT assist
  • Added Primary, Commonplace and Technical overlay mode
  • Added Tint to SDI Superior Overlay
  • Added Overlay Opacity management
  • Added voltage show for non-communicating batteries
  • Added Low Voltage Warning management
  • Added QR code assist for Wi-Fi passwords
  • Added RCP2 exterior lens information assist
  • Added ‘Auto’ to Prime LCD Decision menu
  • Added RED PRO 1.3TB and 4TB assist
  • Added Angelbird AV PRO MK2 660GB, 1320GB, 2TB and 4TB assist
  • Added Exascend Archon 2TB CFx assist
  • Added ProGrade 325GB and 650GB assist
  • Fastened customized preset disappearing when assigned to consumer web page
  • Fastened unintended RF lens motor motion in guide mode
  • Fastened Sigma Cine lens communication concern
  • Fastened incorrectly displayed minimal lens F cease
  • Fastened incorrect scrolling textual content
  • Fastened concern with Sensor Flip calibration
  • Fastened horizontal tear in 4K 8:1 at HFR
  • Fastened horizontal tear in Flip/Mirror mode
  • Fastened ‘low pace’ message with SanDisk CFx card
  • Fastened refresh of LUT menu after import or delete
  • Fastened sluggish/stalled playback of lengthy clip
  • Fastened EF lens detection on startup in AF mode
  • Fastened CFx Time Indicator on startup
  • Fastened Livestream freeze after disabling
  • Fastened no static IP after reboot
  • Modified PPP Baud Fee and IP Handle string in UI
  • Modified consumer calibration dialog to incorporate time estimate
  • Eliminated BETA from Autofocus characteristic
  • Improved SDI Latency

Replace course of

The brand new firmware may be put in into the digital camera following these steps:

  1. Copy the improve folder (containing the improve.bin file) to the highest listing on the CFexpress card.
  2. Energy up the digital camera and insert a CFexpress card into the V-RAPTOR media slot.
  3. Go to Menu > Upkeep > Improve and choose OK.
  4. The digital camera begins the improve course of which is able to robotically restart the digital camera.
  5. After the digital camera restarts to finish the improve course of, choose RESTART as soon as it seems.
  6. Go to Menu > System Settings > System Standing > Digital camera Information to confirm the firmware model after the digital camera boots.

Worth and availability

The firmware replace 1.3.4 is out there now freed from cost and may be downloaded straight on the RED web site (149.8 MB). The RED V-RAPTOR digital camera physique at present retails for $24,500 (round €25,800 plus VAT in Europe).

Do you may have expertise working with the RED V-RAPTOR? What do you consider the brand new firmware replace? Tell us within the remark part beneath the article.