Tile Leveling System Kit with 100pcs Tile Leveler & 4 Special Wrenches & 500pcs 2mm Tile Spacers

Description

[ad_1]
The system ensures flatness between tiles avoiding inequalities.The Tile Leveling System are reusable, it was easy enough to fix or remove with Special wrench.

Package Includes:
100 x replaceable tile levelers (assembled)
500 x tile spacer (2mm)
10 x extra T-needles
4 x wrenches

Steps:
1. Insert T-shaped steel needle along the seam (Tips: the width of tile spacers we made wider than 2mm which make easy for you to take out needles)
2. After the steel needle enters tile gap, turn 90° to make the steel needle clip on the bottom of the two tiles.
3. Tighten the black leveling nut by hand or wrench until the two tiles are on the same horizontal plane (Tips: pay attention to strength degree of your hand during leveling to avoid the tile dislocation caused by excessive force).
4. Before the cement or tile glue has completely dried up (usually no more than 6 hours), tighten the adjusting cover in the opposite direction, then rotate the T-pin 90 degrees so that the T-pin turns to a zigzag parallel to the tile.
5. Remove the leveler, clean and dry storage for reuse. Recyclable and economical, you can share these little gifts with family and friends.

Good rotating thread design, no jamming when you rotate it.
The updated tile leveling system as the T-needles are changeable. And the T-needles are made of manganese steel, with a better hardness than 304 steel.
The tile grout can be 2mm-6mm if you change tile spacer.
100pcs tile leveler, 500pcs tile spacer, 4 wrenches, 10pcs changeable T-needles.
We offer 360-Day Money-Back Service for any quality issues. Any dissatisfaction with the purchase within that period will be responded with a refund.

[ad_2]