PNTGREEN H2001 Mini HVLP Gravity Feed Touch Up Air Spray Gun with 0.8mm Nozzle 125CC (Free Spray Gun Keychain)

Description

Price: [price_with_discount]
(as of [price_update_date] – Details)

[ad_1]

Product Description

Our first priority is creating value for our customers by offering products “Direct to You-No Middleman”, to pass on all the savings to you.

Not Your Average Hardware Store Spray Gun, It’s from a professional Manufacture.

Before First Use

NOTICE: Before first use, clean the
Spray Gun thoroughly.

If not removed, the material used for testing and corrosion prevention will contaminate paint.

Spraying Technique

CAUTION: DO NOT STOP WHEN SPRAYING.
Spraying materials will start to set and dry.as soon as they come in contact with the air.

They will cause a permanent clog if not cleared.immediately.If discontinuing spraying for more than half an hour, turn off the air supply, disconnect Cup from Gun Body and thoroughly rinse Cup and Gun Body with fresh, clean water.

Paint Preparation and Filling

Note:Proper paint mixture is essential. Follow the manufacturer’s directions. Most paints will spray easily if they are thinned properly.

1. Thread the Cup to the Gun Body and tighten until the Cup is securely in place.

2. Thin the paint according to manufacturer’s directions and mix thoroughly.

3. Carefully strain the paint through a paint strainer or a piece of cheesecloth.

HVLP design that saves paint material costs by reducing the amount of overspray.
Stainless steel needle and nozzle accommodate a variety of coatings.
Brass air cap and built-in 3 control knobs to adjust fluid, pattern and air.
Light weight, ergonomic design adn easy trigger pivot reduce operating fatigue
Low nozzle air pressure makes for a more even coating of paint every single time with high atomization; air pressure: 50 PSI, air inlet: 1/4″ NPS, and consumption: 8.8 CFM.

[ad_2]